William SmithIf you’ve ever tried to strip rust off a vintage car chassis or remove layers of ancient paint from a brick wall by hand, you know it is a job that can break your spirit.
I’ve been there, scraping away for hours only to realise I’ve barely made a dent.
That’s where professional sandblasting comes in. It’s one of the most efficient ways to strip surfaces back to their raw, clean state without the back-breaking labour.
Restoring a boat, cleaning industrial machinery, or prepping a driveway all require specific care to avoid damaging the base material.
You need a team that understands the nuances of the job. I’ve looked into the local options to bring you our review of the top Sandblasting Companies in Auckland that can handle the grit.
How much does sandblasting cost in Auckland?
Pinning down an exact price for sandblasting is tricky because no two rust buckets or brick walls are the same. The price reflects the time, specific media, and expertise required to strip the surface without ruining your item, rather than the raw materials alone.
For straightforward surface areas, like a concrete wall or a simple metal sheet, many Auckland blasters quote somewhere in the ballpark of $25 to $55 NZD per square metre, though prices can sit outside this range depending on the job and the provider.
However, don’t be surprised if smaller jobs, such as blasting a set of mag wheels or a garden bench, come with a fixed minimum charge of $200 to $300 NZD to cover setup time, even if the actual blasting only takes a few minutes.
This covers the setup time, which is roughly the same whether they blast for five minutes or fifty.
For larger or more complex projects, like stripping a full car body or industrial machinery, companies usually switch to an hourly trade rate. This typically hovers between $35 and $70 NZD per hour per hour and climbing from there depending on the specialist and the setup required. Keep in mind that specialised media (like glass beads for delicate finishes) and waste disposal for the used grit can add extra costs to the final tally.
1. Auckland Sandblasting LTD
Website: https://www.aucklandsandblastingltd.co.nz/
Address: Unit 4, 1 Binsted Rd, New Lynn, Auckland
Contact: 021 0778 760 / [email protected]
Availability: Mon – Fri, 9 AM – 5:30 PM; Sat, By Appointment
Auckland Sandblasting LTD distinguishes itself with a highly versatile mobile sandblasting service, which effectively solves the problem of transporting immovable objects.
While they operate a fully equipped workshop in New Lynn, their ability to bring the blast unit to your site is a game-changer for fixed assets like swimming pools, heavy structural steel, or large gates.
I actually saw their mobile unit in action on a neighbour’s property recently. They managed to strip a weathered timber deck back to fresh wood without shredding the grain.
Striking that delicate balance is difficult.
They also handle a broad spectrum of media blasting tasks, treating automotive parts and marine hulls with equal skill, backed by over 15 years of combined experience.
Being a smaller operation means that during peak summer renovation months, their availability for mobile call-outs can be a bit tight. You may need to book ahead for mobile work in the busy summer months, especially if your project is time-sensitive.
Customer Reviews
Highly recommended! Mia and his team sandblasted and painted my Land Cruiser. They went above and beyond to get the job done and were really affordable. I truly appreciate Mia’s hard work and ethic.
– rahimullah sahibzada | Google Review
Got my 2018 Hilux done, came out beautiful. Good communication and got the job done within the deadline. Highly recommend
– Jared Liam | Google Review
2. Autoblast
Website: https://autoblast.co.nz/
Address: Unit 9, 59/63 Porana Rd, Glenfield, Auckland
Contact: 09 443 65 74
Availability: Mon – Fri, 8 AM – 5 PM; Sat, 9 AM – 12 PM
Autoblast is one of the most specialised options on this list, focusing almost entirely on automotive media blasting.
Restorers of classic cars or 4×4 owners prepping for the rugged outdoors will find this shop essential.
Their process is tuned for vehicle chassis and thin panels, so the blasting is done in a way that minimises heat build-up and reduces the risk of warping, a common worry with less specialised blasters.
Using high-grade media, they strip off all the rust and old underseal so the surface is perfectly prepped for the zinc arc-spray or epoxy.
Their facility is also large enough to handle campervans and caravans, which not every small blasting shop can comfortably fit.
However, this deep specialisation in automotive blasting means their services often come with a premium price tag compared to a general industrial yard.
You are paying for the assurance that your car won’t come back looking like a crushed soda can.
Customer Reviews
Best communication, honest pricing and a fantastic job. Highly recommended, well above and beyond any other competition in Auckland!
– Codi Logan | Google Review
Gave my Rx7 to these guy’s for a underbody job and they did one of the best jobs, couldn’t have been happier. Thanks to Dave, Rob & Their team. Wonderful job!!!
– Zainal Dean | Google Review
3. Powerstrip Industries Limited
Website: https://www.powerstrip.nz/
Address: 18-20 Pukemiro St, Onehunga, Auckland
Contact: 09 573 0146 / 027 233 1954
Availability: Mon – Fri, 8 AM – 5 PM
Powerstrip Industries offers a critical alternative to traditional abrasive sandblasting: chemical immersion stripping.
While they do offer grit blasting for rust removal, their standout service is the ability to dip large metal items into chemical baths.
This is often superior to sandblasting for delicate alloys or intricate ironwork, where you want to remove powder coats and lacquer without etching the metal surface at all.
It effectively resets the item to a “bare metal” condition with far less risk of pitting than aggressive sandblasting, especially on delicate alloys or ornate ironwork.
They can accommodate surprisingly bulky items in their tanks, including car chassis sections and large garden gates.
I also give them credit for their recycling initiative, where they clean and repurpose plastic paint buckets, reducing landfill waste. The significant limitation here is their strict Monday-to-Friday schedule.
The lack of weekend hours, though, makes it difficult for DIY enthusiasts to drop off or collect their projects without taking time off work.
Customer Reviews
Best quality service in town, it’s a shame they closed now – no one else in Auckland can match their quality in service. All the best Bob
– Tali Leulua’i | Google Review
The place to be in, if you are looking for quality at competitive rates for paint stripping. An experienced bunch of blokes, who know and love their work.
Highly recommended. Cheers!!
– Rajeev Jamwal | Google Review
4. Titan Autoworks Limited
Website: https://www.titanautoworks.co.nz/
Address: 14B Neilpark Drive, East Tāmaki, Auckland
Contact: 027 515 4593 / [email protected]
Availability: Mon – Fri, 8 AM – 4:30 PM; Sat, 9 AM – 12 PM
Titan Autoworks markets itself heavily on “rust-proofing,” but the foundation of that service is their exceptional media blasting capability.
Their blast booth is massive. It is capable of swallowing objects up to 9 meters long and 3.3 meters high. This makes them a go-to option for sandblasting campervans, heavy machinery, and marine parts that are too big for many smaller shops.
I inquired about their process for a friend’s campervan restoration, and their explanation of how they blast, epoxy, and then cavity-wax the underbody was incredibly thorough.
They don’t just blast for the sake of it. They blast with the goal of long-term preservation in mind.
Because their large booth and rust-proofing packages are in demand, it’s smart to plan ahead rather than expecting a same-week turnaround in busy seasons.
Customer Reviews
Our work van required extensive rust repair work done. Josh got back to us promptly with a competitive quote and a fast 3-day turnaround. Thanks Josh for your great customer service and high standard of work. D. Busby – Shade Doctor
– Divena Busby | Google Review
Its great to see a young Fullah doing business so well. Excellent communication and very accommodating. Awesome price for a great job.
– Jamie Young | Google Review
5. Spraywell Industries Ltd
Website: https://spraywell.co.nz/
Address: 343 East Tamaki Road, East Tāmaki, Auckland
Contact: 09 274 7206 / [email protected]
Availability: Mon – Thu, 7 AM – 4 PM; Fri, 7 AM – 3 PM
Spraywell Industries Ltd streamlines the process by housing industrial finishings, abrasive blasting, and powder coating in a single facility.
This is a huge advantage because sandblasted steel is incredibly vulnerable to flash rust if it isn’t coated immediately.
By handling the blasting and the coating in the same facility, Spraywell helps achieve a cleaner, longer-lasting bond because the steel can go straight from prep to coating.
They have been operating since 1985, so their team knows exactly how to blast different substrates, from delicate plastics to heavy steel beams, without causing damage.
They also have the capacity to blast and coat parts up to 7.5 meters long, catering to both residential gates and commercial structural steel.
Because a lot of their work comes from commercial and industrial clients, smaller one-off residential jobs may need to fit around larger production runs. It’s worth asking about current lead times when you enquire.
Customer Reviews
Absolutely awesome service and product…it seems nothing is ever too hard for these guys!! My new welder trolley looks fantastic, so happy and I will definitely use them again
– Paul and Felicia Mansfield | Google Review
Very fast amazing quality highly recommend!!!
– Dominic E.p | Google Review
